Tattoo Kit | Ambition Soldier Wireless Tattoo Machine Kit 2

Once you go wireless, you will love Ambition tattoo machine equipment. Experience the freedom of going wireless by turning your favorite tattoo machine into a wireless machine.
Material: space aluminium alloy Needle Stroke: 4.0mm Motor: Coreless Motor. Ambition Coreless motor is good with lining, shading, color packing, lettering, traditional, neotraditional.
Motor Speed: 10V - 9000RPM One Battery Capacity: 2400mAh, built-in 3x 800mAh lithium battery Charging time: 2-3 hours
Operation time: Under normal 8V voltage, the voltage stable state can last for more than 10 hours, long time working the voltage is stable.
Output fixed current：2A Working voltage: 3.7V Output Voltage : 5V-12V LED display content: output voltage range + battery usage + working time
Instructions for use:
- Power ON/OFF: Long press "O" key for 3 seconds
- Output pause / resume: Short press "O" key to pause the output, and short press it again to resume the output(the resume voltage is the working voltage before the pause).
- Adjust output voltage: Press the "+" or"-" key to adjust output voltage. The voltage can be adjusted through button (+) and (-) respectively with the voltage of 0.1V on each press. - Working time: The working time can be accurate to minutes. When the power is turned off, the time will be cleared. When the output is paused, it will also stop counting.
Power: The LED display will show the remaining power, and the full power will display 4 divisions. Fast charging through the matching fast-charging cable can usually be fully charged in 2-3 hours. Please pay attention to the change of power at any time to prevent sudden power loss from affecting your tattooing work.